home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / gen21.zip / GEN1.DAT < prev    next >
Text File  |  1991-11-22  |  12KB  |  291 lines

  1. 000                These are the colors for the Help|text.   You can change them to be|the same as the calculator colors
  2. This is the  VEC question pool for the  General License.  The F2
  3. key will rerun the setup routine at this time.   Use the Esc key
  4. (right mouse button)  to end the program instead of just turning
  5. off the computer and then the test answers and(or) last question
  6. will be saved.  Use the F1 key for help, try it now.
  7. When answering the questions, enter A, B, C, or D. When you have
  8. the answer that you desire, tap the space bar(or mouse) to go on
  9. to the next question.   Use P to return to the previous question
  10. when scanning the question pool. Use P for π when the calculator
  11. is on the screen.   Select one of the following or tap the space
  12. bar(or mouse) to start.
  13. A. Scan entire VEC question pool
  14. B. Continue scanning question pool
  15. C. Start a new sample test
  16. D. Continue test or review
  17. *
  18. 001A-3.2   A 1-4   Maximum power on 30 meters|is 200 Watts PEP output   
  19. What is the maximum transmitting power permitted an amateur
  20. station on 10.14-MHz?
  21. A. 200 watts PEP output
  22. B. 1000 watts DC input
  23. C. 1500 watts PEP output
  24. D. 2000 watts DC input
  25. *
  26. 002A-3.3   AR9-4   Novice limit of 200 watts PEP output|F1 again for 75/80-meter band chart 
  27. What is the maximum transmitting power permitted an amateur
  28. station on 3725-kHz?
  29. A. 200 watts PEP output
  30. B. 1000 watts DC input
  31. C. 1500 watts PEP output
  32. D. 2000 watts DC input
  33. *
  34. 003A-3.4   CR9-4   Amateur limit of 1500 watts PEP output
  35. What is the maximum transmitting power permitted an amateur
  36. station on 7080-kHz?
  37. A. 200 watts PEP output
  38. B. 1000 watts DC input
  39. C. 1500 watts PEP output  
  40. D. 2000 watts DC input
  41. *
  42. 004A-3.5   CR9-4   Amateur limit of 1500 watts PEP output
  43. What is the maximum transmitting power permitted an amateur
  44. station on 24.95-MHz?
  45. A. 200 watts PEP output
  46. B. 1000 watts DC input
  47. C. 1500 watts PEP output
  48. D. 2000 watts DC input
  49. *
  50. 005A-3.7   AR9-4   The Novice limit of 200 watts PEP|F1 again for 15-meter band chart 
  51. What is the maximum transmitting power permitted an amateur
  52. station transmitting on 21.150-MHz?
  53. A. 200 watts PEP output
  54. B. 1000 watts DC input
  55. C. 1500 watts DC input
  56. D. 1500 watts PEP output
  57. *
  58. 006A-4.1   CR229   Station call and either slant mark "/"|or any suitable word  and  the General|call sign 
  59. How must a General control operator at a Novice station make
  60. the station identification when transmitting on 7250 kHz in
  61. ITU Region 2?
  62. A. The control operator should identify the station with his
  63.    or her call, followed by the word "controlling" and the
  64.    Novice call
  65. B. The control operator should identify the station with his
  66.    or her call, followed by the slant mark "/" (or any suitable
  67.    word) and the Novice call
  68. C. The control operator should identify the station with the
  69.    Novice call, followed by the slant mark "/" (or any suitable
  70.    word) and his or her own call
  71. D. A Novice station should not be operated on 7250 kHz, even
  72.    with a General class control operator
  73. *
  74. 007A-4.3   CR229   Station call and either slant mark "/"|or any suitable word (like temporary) |and the identifier "AG"
  75. How must a control operator who has a Technician class license 
  76. and a "Certificate of Successful Completion of Examination" for
  77. General class privileges identify the station when transmitting
  78. on 14.325 MHz? (Assume telephony)
  79. A. General-class privileges do not include 14.325 MHz
  80. B. No special form of identification is needed
  81. C. The operator shall give his/her call sign, followed by "slant
  82.    mark" or any suitable word that denotes the slant mark and the
  83.    identifier "AG"
  84. D. The operator shall give his/her call sign, followed by the date
  85.    and location of the VEC examination where he/she obtained the
  86.    upgraded license
  87. *
  88. 008A-6.1   BR228   If there is a third party agreement
  89. Under what circumstances, if any, may third-party communications
  90. be transmitted to a foreign country by an amateur station where
  91. the third party is not eligible to be a control operator of the
  92. station?
  93. A. Under no circumstances
  94. B. Only if the country has a third party communications agreement
  95.    with the United States
  96. C. Only if the control operator is an Amateur Extra class licensee
  97. D. Only if the country has formal diplomatic relations with the
  98.    United States
  99. *
  100. 009A-6.2   CR228   Personal and technical
  101. What types of messages may be transmitted by an amateur station
  102. to a foreign country for a third-party?
  103. A. Third-party communications involving material compensation,
  104.    either tangible or intangible, direct or indirect, to a third
  105.    party, a station licensee, a control operator, or other person
  106. B. Third-party communications facilitating the business affairs
  107.    of any party
  108. C. Third-party communications limited to messages of a technical
  109.    nature or remarks of a personal character
  110. D. No messages may be transmitted to foreign countries for third
  111.    parties
  112. *
  113. 010A-6.6   AR228   Third-party messages may be sent if|there is a third party agreement   
  114. Which of the following limitations apply to third-party messages
  115. transmitted to foreign countries where the third party is not
  116. eligible to be a control operator of the station?
  117. A. Third-party messages may only be transmitted to amateurs in
  118.    countries with which the US has a third party communications
  119.    agreement
  120. B. Third-party messages may only be sent to amateurs in ITU
  121.    Region 1
  122. C. Third-party messages may only be sent to amateurs in ITU
  123.    Region 3
  124. D. Third-party messages must always be transmitted in English
  125. *
  126. 011A-8.6   DR231   If the control operator of the |repeater transmitter is General|class or higher
  127. Under what circumstances, if any, may an amateur station
  128. transmitting on 29.64-MHz repeat the 146.34-MHz signals of an
  129. amateur station with a Technician control operator?
  130. A. Under no circumstances
  131. B. Only if the station on 29.64 MHz is operating under a Special
  132.    Temporary Authorization allowing such retransmission
  133. C. Only during an FCC-declared general state of communications
  134.    emergency
  135. D. Only if the control operator of the repeater transmitter is
  136.    authorized to operate on 29.64 MHz
  137. *
  138. 012A-9.1   C 1-4   Entire band 1.8 to 2.0 MHz
  139. What frequency privileges are authorized to General operators
  140. in the 160-meter wavelength band?
  141. A. 1800 to 1900 kHz only
  142. B. 1900 to 2000 kHz only
  143. C. 1800 to 2000 kHz only
  144. D. 1825 to 2000 kHz only
  145. *
  146. 013A-9.2   A 1-4   CW/RTTY 3525 to 3750 kHz |Phone   3850 to 4000 kHz |F1 again  for band chart 
  147. What frequency privileges are authorized to General operators
  148. in the 75/80-meter wavelength band?
  149. A. 3525 to 3750 and 3850 to 4000 kHz only
  150. B. 3525 to 3775 and 3875 to 4000 kHz only
  151. C. 3525 to 3750 and 3875 to 4000 kHz only
  152. D. 3525 to 3775 and 3850 to 4000 kHz only
  153. *
  154. 014A-9.3   D 1-4   CW/RTTY  7025 to 7150 kHz |Phone    7225 to 7300 kHz |F1 for 40-meter band chart
  155. What frequency privileges are authorized to General operators
  156. in the 40-meter wavelength band?
  157. A. 7025 to 7175 and 7200 to 7300 kHz only
  158. B. 7025 to 7175 and 7225 to 7300 kHz only
  159. C. 7025 to 7150 and 7200 to 7300 kHz only
  160. D. 7025 to 7150 and 7225 to 7300 kHz only
  161. *
  162. 015A-9.4   A 1-4   Entire band  10.1 to 10.15|Maximum power on 30 meters|is 200 Watts PEP output   
  163. What frequency privileges are authorized to General operators
  164. in the 30-meter wavelength band?
  165. A. 10,100 to 10,150 kHz only
  166. B. 10,105 to 10,150 kHz only
  167. C. 10,125 to 10,150 kHz only
  168. D. 10,100 to 10,125 kHz only
  169. *
  170. 016A-9.5   B 1-4   CW/RTTY 14.025 to 14.150 MHz|Phone   14.225 to 14.350 MHz|Push F1 again for band chart
  171. What frequency privileges are authorized to General operators
  172. in the 20-meter wavelength band?
  173. A. 14,025 to 14,100 and 14,175 to 14,350 kHz only
  174. B. 14,025 to 14,150 and 14,225 to 14,350 kHz only
  175. C. 14,025 to 14,125 and 14,200 to 14,350 kHz only
  176. D. 14,025 to 14,175 and 14,250 to 14,350 kHz only
  177. *
  178. 017A-9.6   C 1-4   CW/RTTY 21.025 to 21.200 MHz|Phone   21.300 to 21.450 MHz|Push F1 again for band chart
  179. What frequency privileges are authorized to General operators
  180. in the 15-meter wavelength band?
  181. A. 21,025 to 21,200 and 21,275 to 21,450 kHz only
  182. B. 21,025 to 21,150 and 21,300 to 21,450 kHz only
  183. C. 21,025 to 21,200 and 21,300 to 21,450 kHz only
  184. D. 21,000 to 21,150 and 21,275 to 21,450 kHz only
  185. *
  186. 018A-9.7   A 1-4   Entire band 24.89 - 24.99 MHz
  187. What frequency privileges are authorized to General operators
  188. in the 12-meter wavelength band?
  189. A. 24,890 to 24,990 kHz only
  190. B. 24,890 to 24,975 kHz only
  191. C. 24.900 to 24,990 kHz only
  192. D. 24,790 to 24,990 kHz only
  193. *
  194. 019A-9.8   A 1-4   Entire band 28.0 to 29.7 MHz|Push F1 again for band chart
  195. What frequency privileges are authorized to General operators
  196. in the 10-meter wavelength band?
  197. A. 28,000 to 29,700 kHz only
  198. B. 28,025 to 29,700 kHz only
  199. C. 28,100 to 29,700 kHz only
  200. D. 28,025 to 29,600 kHz only
  201. *
  202. 020A-9.9   C 1-4   General and above
  203. Which operator licenses authorize privileges on 1820-kHz?
  204. A. Extra only
  205. B. Extra, Advanced only
  206. C. Extra, Advanced, General only
  207. D. Extra, Advanced, General, Technician only
  208. *
  209. 021A-9.10  B 1-4   Extra,  Advanced,  and General only|F1 again for 75/80-meter band chart
  210. Which operator licenses authorize privileges on 3950-kHz?
  211. A. Extra, Advanced only
  212. B. Extra, Advanced, General only
  213. C. Extra, Advanced, General, Technician only
  214. D. Extra, Advanced, General, Technician, Novice only
  215. *
  216. 022A-9.11  C 1-4   Extra, Advanced and General only|F1 again for 40-meter band chart
  217. Which operator licenses authorize privileges on 7230-kHz?
  218. A. Extra only
  219. B. Extra, Advanced only
  220. C. Extra, Advanced, General only
  221. D. Extra, Advanced, General, Technician only
  222. *
  223. 023A-9.12  A 1-4   General and above
  224. Which operator licenses authorize privileges on 10.125-MHz?
  225. A. Extra, Advanced, General only
  226. B. Extra, Advanced only
  227. C. Extra only
  228. D. Technician only
  229. *
  230. 024A-9.13  B 1-4   Extra, Advanced and General only|F1 again for 20-meter band chart
  231. Which operator licenses authorize privileges on 14.325-MHz?
  232. A. Extra, Advanced, General, Technician only
  233. B. Extra, Advanced, General only
  234. C. Extra, Advanced only
  235. D. Extra only
  236. *
  237. 025A-9.14  C 1-4   Extra, Advanced and General only|F1 again for 15-meter band chart
  238. Which operator licenses authorize privileges on 21.425-MHz?
  239. A. Extra, Advanced, General, Novice only
  240. B. Extra, Advanced, General, Technician only
  241. C. Extra, Advanced, General only
  242. D. Extra, Advanced only
  243. *
  244. 026A-9.15  C 1-4   General and above
  245. Which operator licenses authorize privileges on 24.895-MHz?
  246. A. Extra only
  247. B. Extra, Advanced only
  248. C. Extra, Advanced, General only
  249. D. None
  250. *
  251. 027A-9.16  C 1-4   General and above|Push F1 again for band chart
  252. Which operator licenses authorize privileges on 29.616-MHz?
  253. A. Novice, Technician, General, Advanced, Extra only
  254. B. Technician, General, Advanced, Extra only
  255. C. General, Advanced, Extra only
  256. D. Advanced, Extra only
  257. *
  258. 028A-10.1  A 1-4   Entire band  1800 - 2000 kHz
  259. On what frequencies within the 160-meter wavelength band may
  260. phone emissions be transmitted?
  261. A. 1800-2000 kHz only
  262. B. 1800-1900 kHz only
  263. C. 1900-2000 kHz only
  264. D. 1825-1950 kHz only
  265. *
  266. 029A-10.2  C 1-4   CW may be used on the entire|band  3500 - 4000 kHz
  267. On what frequencies within the 80-meter wavelength band may
  268. CW emissions be transmitted?
  269. A. 3500-3750 kHz only
  270. B. 3700-3750 kHz only
  271. C. 3500-4000 kHz only
  272. D. 3890-4000 kHz only
  273. *
  274. 030A-10.3  D 1-4   Top of band  7150 - 7300 kHz|Push F1 again for band chart
  275. On what frequencies within the 40-meter wavelength band may
  276. image emissions be transmitted?
  277. A. 7225-7300 kHz only
  278. B. 7000-7300 kHz only
  279. C. 7100-7150 kHz only
  280. D. 7150-7300 kHz only
  281. *
  282. 031A-10.4  C 1-4   Entire band 10.10 to 10.15 MHz
  283. On what frequencies within the 30-meter wavelength band may
  284. RTTY emissions be transmitted?
  285. A. 10.140-10.150 MHz only
  286. B. 10.125-10.150 MHz only
  287. C. 10.100-10.150 MHz only
  288. D. 10.100-10.125 MHz only
  289. *
  290. 
  291.